Study of cork (from Quercus suber L.)-wine model interactions based on voltammetric multivariate analysis

The cork from Quercus suber L. is the premium raw material used to produce wine-bottling stoppers; however, being a natural product, cork can be contaminated and attacked in different ways that could promote differences in its proprieties. A specific contamination is the defect known in the industry as “Mancha Amarela—Yellow spot” (MA). This cork shows modifications in its mechanical, structural and optical properties and is potentially able to cause off-flavours in wine. In this study, a new analytical approach is proposed for the rapid screening of cork-wine model interactions in order to determine if the cork were able to contaminate a wine. Cork samples classified as standard (S) and cork MA were put in contact with a wine model matrix. The model matrix was analysed by cyclic voltammetry and square wave voltammetry in function of different contact times. Considering that matrices in contact with cork S and MA exhibited different pH, the influence of this parameter on the distinction power was also evaluated. The data sets obtained from the different techniques were treated by principal component analysis (PCA) and PLS_Cluster. The major difference between samples S and MA is the occurrence of an important peak at ca. 580 mV in the MA voltammograms. This more positive peak may be assigned to lignin related phenolics; therefore, it can be proposed as a possible marker to follow lignin degradation.     

The first fluorogenic assay for detecting a Baeyer-Villigerase activity in microbial cells

The first fluorogenic assay allowing for detection of microbial enzymes able to perform Baeyer-Villiger oxidation is described. This is based on the use of 4-oxopentyl umbelliferyl ether 1 as a fluorogenic substrate. When Baeyer-Villigerases active against this test ketone are present in the selected whole cells, 1 is transformed into 3-hydroxypropyl umbelliferyl ether 3, which, in a subsequent step, releases the fluorescent product umbelliferone. Different microorganisms, known to be endowed with Baeyer-Villigerase activity, were assayed.     

Micellar-stabilized room-temperature phosphorimetric determination of the fungicide thiabendazole in canned pineapple samples

A method for the determination of the fungicide thiabendazole (TBZ) by micellar-stabilized room-temperature phosphorescence is described. It does not require any separation step and allows the direct determination of the fungicide in canned pineapple samples. The effect of various experimental conditions is discussed in detail. The analytical curve of thiabendazole gives a linear dynamic range of 23.8–500.0 ng mL^–1 and a detection limit of 23.8 ng mL^–1. Recoveries of 103.9 and 89.2% for syrup and canned pineapple pulp, respectively, were obtained for 250 ng mL^–1 thiabendazole.     

Using capillary electrophoresis for the determination of organic acids in Port wine

The simultaneous separation and determination of organic acids in several samples of white and red Port wines was performed by capillary zone electrophoresis using indirect UV detection with 2,6-pyridinedicarboxylic acid as a background electrolyte buffer. Operational parameters like migration time, temperature, voltage and capillary length were optimized. Sixteen samples of red wine and four samples of white wine were used to analyze for tartaric, malic, lactic, succinic and acetic acids using glyoxylic acid as the internal standard. The method is rapid, sensitive and quantitative, and time-consuming sample preparation, such as solid-phase extraction or liquid-liquid extraction procedure, is not required.     

Simultaneous determination of arsenic, antimony and selenium by gas-phase diode array molecular absorption spectrometry, after preconcentration in a cryogenic trap

This paper describes a method for the simultaneous determination of As(III), Sb(III) and Se(IV) by combining hydride generation and gas phase molecular absorption spectrometry. A system for continuous hydride generation has been designed and developed, based on the use of a double process of gas-liquid separation, and optimal compromise operation conditions for the three compounds have been found. After generation, the hydrides are collected in a liquid nitrogen cryogenic trap, and then evaporated and driven to the flow cell of a diode array spectrophotometer, in which the transient signals over the 190–250 nm wavelength interval are measured. Under the recommended conditions (sample flow: 35 ml min⁻¹, 0.5 M HCl; reductor flow: 4 ml min⁻¹ of 4% NaBH₄, solution) linear response ranges above 50 μg 1⁻¹ for As(III), 30 μg 1⁻¹ for Sb(III) and 200 μg 1⁻¹ for Se(IV) are obtained with detection limits of 22 μg 1⁻¹, 15 μg 1⁻¹ and 65 μg 1⁻¹, respectively. Multiwavelength linear regression equations were used for the simultaneous determination of the three elements in different synthetic samples, with good precision and accuracy and to study simultaneously the interference from different chemical species for the three compounds. Results were similar to those obtained by other techniques using hydride generation.     

Solid state coordination chemistry of copper(II)/α-hydroxycarboxylato/2,2′-bipyridine systems

Four new two-ligand complexes of copper(II) with 2,2′-bipyridine and one of three different α-hydroxycarboxylic acids (lactic, H₂LACO; 2-methyllactic, H₂MLACO; and mandelic, H₂MANO) were prepared. Complexes 1–3 of general formula [Cu(HL)₂(bipy)]·nH₂O (HL=monodeprotonated acid), were characterized by elemental analysis, IR, electronic and EPR spectroscopy, magnetic measurements and thermogravimetric analysis. Complexes 1 (HL=HLACO, n=2), 2 (HL=HMLACO, n=1) and 3a (the result of attempted recrystallization of 3, of formula [Cu(HMANO)(bipy)₂](HMANO)·H₂MANO·CH₃CN were studied by X-ray diffractometry. The copper atom is in an elongated, tetragonally distorted octahedral environment in 1 and 2 and in 3a has a coordination polyhedron intermediate between a square pyramid and a trigonal bipyramid, as evaluated in terms of the parameter τ. In 1 and 2 the α-hydroxycarboxylato ligand is bidentate and monoanionic but in 3a there are three forms: a monodentate monoanion, a monoanionic counterion, and a neutral molecule.     

Determination of lead in natural waters using flow injection with on-line preconcentration and flame AAS detection

A rapid and sensitive method has been developed for the determination of lead in water samples by flame atomic absorption spectrometry using on-line preconcentration on a microcolumn packed with silica gel treated with a mixture of Aliquat 336 and nitroso-R-salt. The lead is retained at pH 5.5. The preconcentrated lead is directly eluted from the column to the nebulizer-burner system using 150 L of 0.1 mol/L hydrochloric acid. The optimum preconcentration conditions are given and the retention efficiency achieved is higher than 80%. The enrichment factor is 37 and 100 for sample volumes of 5 and 30 mL, respectively. The limits of detection are 10.0, 6.0 and 4.0 ng/mL when 5, 10 and 30 mL of water is preconcentrated.     

Synthesis of monoacyl A-ring precursors of 1alpha,25-dihydroxyvitamin D3 through selective enzymatic hydrolysis

An efficient synthesis of monoacylated 1alpha,25-dihydroxyvitamin D3 A-ring precursors 15, 16, 18, and 19 has been described through an enzymatic hydrolysis process. Candida antarctica A lipase (CAL-A) hydrolyzes the C-5 acetate ester in trans stereoisomers 9 and 13, with complete and high selectivity, respectively. In the case of cis isomers 11 and 14, Chromobacterium viscosum lipase (CVL) is the enzyme of choice, exhibiting opposite selectivity for these two enantiomers. This lipase selectively catalyzes the hydrolysis at the C-3 acetate in diester 11 and at C-5 position in diester 14. It is noteworthy that through a hydrolysis reaction CAL-A and CVL allow the synthesis of the four A-ring monoacetylated precursors of 1alpha,25-dihydroxyvitamin D3, precursors which are complementary to those obtained by the enzymatic acylation process. In addition, with excellent yield CVL selectively hydrolyzes the C-3 chloroacetate ester instead of the C-5 acetate in diester 22, a key intermediate in the synthesis of new A-ring modified 1alpha,25-dihydroxyvitamin D3 analogues.     

On the influence of size, zeta potential, and state of motion of dispersed particles on the conductivity of a colloidal suspension

The dependence of the DC conductivity of diluted colloidal suspensions on the size, zeta potential, and state of motion of the dispersed particles is analyzed both theoretically and numerically. It is shown that the simple formula that represents the conductivity as a sum of products: charge times mobility, taken over all the carriers present in the suspension, is only valid for exceedingly low values of the product kappaa. In contrast, the formulation based on the value of the dipolar coefficient of the suspended particles seems to be valid for all the range of particle sizes. This assertion is only true if the dipolar coefficient is calculated taking into account the electrophoretic motion of the particles. For very low values of the product kappaa, the dipolar coefficient of particles free to move can be several orders of magnitude larger than that of immobile particles.     

Energetics of hydroxybenzoic acids and of the corresponding carboxyphenoxyl radicals. Intramolecular hydrogen bonding in 2-hydroxybenzoic acid

The energetics of the phenolic O-H bond in the three hydroxybenzoic acid isomers and of the intramolecular hydrogen O-H- - -O-C bond in 2-hydroxybenzoic acid, 2-OHBA, were investigated by using a combination of experimental and theoretical methods. The standard molar enthalpies of formation of monoclinic 3- and 4-hydroxybenzoic acids, at 298.15 K, were determined as Delta(f)(3-OHBA, cr) = -593.9 +/- 2.0 kJ x mol(-1) and Delta(f)(4-OHBA, cr) = -597.2 +/- 1.4 kJ x mol(-1), by combustion calorimetry. Calvet drop-sublimation calorimetric measurements on monoclinic samples of 2-, 3-, and 4-OHBA, led to the following enthalpy of sublimation values at 298.15 K: Delta(sub)(2-OHBA) = 94.4 +/- 0.4 kJ x mol(-1), Delta(sub)(3-OHBA) = 118.3 +/- 1.1 kJ x mol(-1), and Delta(sub)(4-OHBA) = 117.0 +/- 0.5 kJ x mol(-1). From the obtained Delta(f)(cr) and Delta(sub) values and the previously reported enthalpy of formation of monoclinic 2-OHBA (-591.7 +/- 1.3 kJ x mol(-1)), it was possible to derive Delta(f)(2-OHBA, g) = -497.3 +/- 1.4 kJ x mol(-1), Delta(f)(3-OHBA, g) = -475.6 +/- 2.3 kJ x mol(-1), and Delta(f)(4-OHBA, cr) = -480.2 +/- 1.5 kJ x mol(-1). These values, together with the enthalpies of isodesmic and isogyric gas-phase reactions predicted by density functional theory (B3PW91/aug-cc-pVDZ, MPW1PW91/aug-cc-pVDZ, and MPW1PW91/aug-cc-pVTZ) and the CBS-QMPW1 methods, were used to derive the enthalpies of formation of the gaseous 2-, 3-, and 4-carboxyphenoxyl radicals as (2-HOOCC(6)H(4)O(*), g) = -322.5 +/- 3.0 kJ.mol(-1) Delta(f)(3-HOOCC(6)H(4)O(*), g) = -310.0 +/- 3.0 kJ x mol(-1), and Delta(f)(4-HOOCC(6)H(4)O(*), g) = -318.2 +/- 3.0 kJ x mol(-1). The O-H bond dissociation enthalpies in 2-OHBA, 3-OHBA, and 4-OHBA were 392.8 +/- 3.3, 383.6 +/- 3.8, and 380.0 +/- 3.4 kJ x mol(-1), respectively. Finally, by using the ortho-para method, it was found that the H- - -O intramolecular hydrogen bond in the 2-carboxyphenoxyl radical is 25.7 kJ x mol(-1), which is ca. 6-9 kJ x mol(-1) above the one estimated in its parent (2-OHBA), viz. 20.2 kJ x mol(-1) (theoretical) or 17.1 +/- 2.1 kJ x mol(-1) (experimental).